FreeConverterFree · Private · Online
Metal & Workshop

CNC Turning Time Calculator

Work out the spindle speed, feed rate and cutting time for a turning pass on a lathe or CNC machine.

Questions

What are the formulas?

Metric: rpm = 1000 × cutting speed ÷ (π × diameter). Inch: rpm = 12 × SFM ÷ (π × diameter). Feed rate = feed per rev × rpm. Time = length ÷ feed rate × passes.

What cutting speed should I use?

It depends on the material, the tool and the coolant. Use the tool maker’s catalogue. As a starting point, carbide on mild steel often runs 150 to 250 m/min and on aluminium over 300 m/min.

Does the time include setup or tool changes?

No. It is the cutting time only. Add rapid moves, tool changes and loading time for a full cycle time, then use the CNC cost calculator.